With the development of China's economy, the use method of steel mesh skeleton composite pipe becomes more and more simple, and because of its good performance, this product has a wide range of applications. However, one of the operation steps is relatively difficult to remove the oxide layer, so let's explain how to remove the oxide layer correctly in detail.
It is advisable to use a hand scraper (glass sheet) during operation. As the small diameter pipe wall of the pipe is thin, it is only necessary to remove the oxide layer. Pay attention to the operation details to improve the construction efficiency. When removing the oxide layer of the steel wire mesh skeleton composite pipe, the entire periphery shall be scraped evenly, and all aspects shall be covered. Missing scraping is not allowed.
If the scraping length is 30mm greater than the socket depth of the cylinder, the inner wall of the pipe fittings also needs to be cleaned. If the diameter is small, it can be sprinkled and scrubbed. If the diameter is large, it can be scraped off. Since the inner wall cloth of pipe fittings has copper effect, it is advisable to use manual scraping, and the holes should be treated with an electric mill. When using an electric mill, soft grinding discs should be used to avoid exposure of copper wires.
To sum up, you can generally understand how to remove the oxide layer of the steel mesh skeleton composite pipe. However, when using this method, you must follow the operating standards, keep in mind and be diligent, so that you can master this technology skillfully and reduce unnecessary operating problems.
